| ITEM | T60MSY-700 |
| Processing Range | Maximum swing diameter of the machine tool | 600mm |
| Maximum machining diameter for spindle disc type parts | 480mm |
| Maximum machining diameter for countershaft disc type parts | 350mm |
| Maximum turning length (one clamp and one center) | 700mm |
| Maximum milling length (one clamp and one center) | 500mm |
| The maximum distance from the main shaft jaw to the countershaft jaw. | 700mm |
| The minimum distance from the main shaft jaw to the countershaft jaw. | 30mm |
| The minimum distance from the main jaw to the cutter head. | -110mm |
| The maximum distance from the main jaw to the cutter head. | 700mm |
| Spindle | Spindle Structure | Permanent magnet synchronous electric spindle |
| Spindle nose type | A2-8 |
| Spindle through-hole | φ85mm |
| Maximum spindle speed | 0-2500r/min |
| Sub-spindle | Spindle Structure | Permanent magnet synchronous electric spindle |
| Spindle nose type | A2-6 |
| Spindle through-hole | φ66mm |
| Maximum spindle speed | 0-4500r/min |
| Feed | Feed motor flange | Model 130 / Model 174 |
| Model of the X-axis guide rail | 45 rollers |
| Model of the Y-axis guide rail | 35 rollers |
| Model of the Z - axis guide rail | 45 rollers |
| Model of the ZB-axis guide rail | 35 rollers |
| Model of the X-axis lead screw | 3210-C3 |
| Model of the Y-axis lead screw | 3210-C3 |
| Model of the Z-axis lead screw | 4010-C3 |
| ZB - axis feed lead screw | 3210-C3 |
| travel | Maximum travel of the X-axis (cutter head size 330mm) | 320mm(- 20mm至+300mm) |
| Maximum travel of the Y - axis | +58至-50mm(85mm中心高刀座) |
| From +58 to -58 mm (tool holder with a center height of 100 mm) |
| Maximum travel of the Z - axis | 750mm |
| Maximum travel of the ZB - axis | 700mm |
| Rapid traverse speed | Rapid positioning of the X - axis | ≤24m/min |
| Rapid positioning of the Y - axis | ≤10m/min |
| Rapid positioning of the Z - axis | ≤24m/min |
| Rapid positioning of the ZB - axis | ≤10m/min |
| Accuracy | X-axis repeated positioning | ±0.003mm |
| Y-axis repeated positioning | ±0.003mm |
| Z-axis repeated positioning | ±0.005mm |
| ZB-axis repeated positioning | ±0.003mm |
